Feb 112018
 

Countertops and Back-Splash Before 01

Countertops and Back-Splash Before 02

Countertops and Back-Splash Before 03

Countertops and Back-Splash Before 06

Countertops and Back Splash After 01

Countertops and Back Splash After 02

Countertops and Back Splash After 03

Countertops and Back Splash After 05

Countertops and Back Splash After 06

Mar 172017
 

Burke Counter Tops Before 01

Burke Counter Tops Before 02

Burke Counter Tops Before 03

Burke Counter Tops Before 04

Burke Counter Tops After 02

Burke Counter Tops After 03

Burke Counter Tops After 04

Burke Counter Tops After 05

Burke Counter Tops After 06

Burke Counter Tops After 07

Customer wanted n new look for their kitchen counter-tops, We resurfaced the existing laminate counter-tops with a new marble look. This “Kitchen Makeover” brightened their kitchen and helped make the space look bigger.

Aug 282016
 

You too can have your laminate countertops refinished to look like a solid slab of beautiful Carrara Marble! Advanced Resurfacing Experts, LLC can repair your outdated and/or damaged laminate countertops and give your kitchen the face lift needed for your upcoming Holiday Dinner parties.

Stone Countertop dealers Advertise $9.00 and $10.00 per square foot prices for Solid Stone countertops, However these prices do not include cutting to size grinding and polishing or removing your old countertops and installation of the new solid countertops. The final cost can be more accurately in the $22.00 $26.00 per square foot for your new countertops. The countertops we resurfaced in the photos below are 59 square foot of countertop which would have cost the customer $1295.00 – $1534.00 or more. Our price to the customer for just the countertops alone was $885.00 (Labor and Material). Approximately 30% to 50% savings for the customer countertops.

We A.R.E. Your Surface Doctor!

Call today for your FREE ESTIMATE!

Before 1

Before Resurfacing

Before 2

Before Resurfacing

Before 3

Before Resurfacing

Laminate Counter-tops After Resurfaced to look like Carrara Marble.

Laminate Counter-tops After Resurfaced to look like Carrara Marble.

Laminate Counter-tops After Resurfaced to look like Carrara Marble.

Laminate Counter-tops After Resurfaced to look like Carrara Marble.

Laminate Counter-tops After Resurfaced to look like Carrara Marble.

Laminate Counter-tops After Resurfaced to look like Carrara Marble.

Laminate Counter-tops After Resurfaced to look like Carrara Marble.

Laminate Counter-tops After Resurfaced to look like Carrara Marble.

Jul 082016
 

Tulsa Customer was doing make-ready repairs and cleaning up his rental property and dropped a ball pin hammer in the sink and below is the damage he was left with. We repaired the hole in the sink making the surface smooth and like new then resurfaced the sink.

Repair and resurfacing Cost = $225.00

New Sink of this style and Quality = $398.00

Labor to Change Out = $150.00

Savings = $323.00

Pedestal sink before repairs and resurfacing

Pedestal sink before repairs and resurfacing

Pedestal sink before repairs closeup

Pedestal sink before repairs closeup.

Pedestal sink after repair and resurfacing

Pedestal sink after repair and resurfacing

Pedestal sink after repair and resurfacing

Pedestal sink after repair and resurfacing closeup view of repair area.

Pedestal sink after repair and resurfacing closeup view of repair area

Pedestal sink after repair and resurfacing closeup view of repair area.

Pedestal sink after repair and resurfacing closeup view of repair area

Pedestal sink after repair and resurfacing closeup view of repair area.

Feb 102016
 

Kitchen Resurfacing Project

Kitchen Resurfacing Project

The above kitchen makeover saved the owners several thousand dollars. The owner was not looking to replace their cabinets or countertops because they were damaged, they simply wanted to update the look and color of their kitchen. They loved the arangement of the kitchen but the style and color was old and dated.

This customer would have been displaced from their kitchen a week or longer on a complete tear out and replacement project, but with our products and service they were back in their new kitchen in 4 days after curing time. Our surfacing products adhere to laminate countertops, wood cabinets, and ceramic tile backsplashes found in this kitchen makeover project. The cabinets were solid color coated, while the laminate countertop was stone finished to a solid countertop look with no seams, and the ceramic tile backsplash was given a striped/checkerboard 3 tone finish.

About or Products and Service!

Our resurfacing products are 2 part surfacing products based on aerospace coating technology and applications. We painstakingly clean and prepare your existing surfaces then treat them with an aerospace bonding agent that etches itself into the existing surface creating a greater bonding surface and insures greater durability.

Once the bonding agent is verified as complete, (via ultraviolet light), then the 2 parts coating is applied. Our surfacing has been tested against numerous known products and chemicals known to cause damages to most surfaces. Our surfacing products have some of the highest laboratory tested ratings against many of the acids and cleaning products that are known to come in contact with the surfaces we apply our coatings to.

You can be assured that the products we use are the very best in the industry. We never cut corners and stand behind our products and services. When we finish your resurfacing project you will have a finished surface or surfaces that you can and will be proud of. Not to mention your friends and visitors will swear you spent a fortune while you laugh your way to the bank with your savings!

CALL (918) 246-6493 for “YOUR FREE ESTIMATE TODAY”

Feb 102016
 

CALL (918) 246-6493 for “YOUR FREE ESTIMATE TODAY”

Damaged Corian Sink Before

Damaged Corian Sink Before

Damaged Corian Sink After

Damaged Corian Sink After

The above Corian sink was damaged by a heavy cast-iron skillet that had been dropped. The hole went from the drain up the side wall of the sink, viewable in the before image above.

The inside and underside of the sink had to be cleaned and prepared insuring no dirt, grease of oily residue was present on the surface. The hole then had to be filled and bonded to the existing inside and outside surface of the sink. The repair was feathered into the existing surface inside and out for durability and proper adhesion creating a solid liquid tight repaired surface.

Once the repair was properly matched to the shape and texture of the remainder of the sink the entire inside and underside surfaces were again cleaned and prepared removing all dirt, grease, water and other substances that could prevent adhesion. Our aerospace bonding agent is then applied to insure a strong and durable bond of our 2 part aerospace surface coating.

Our surface coating was then color matched to the existing sink and countertop and 4 coats of our 2 part aerospace surface coating was applied providing a finish that matched the repair to the existing one piece countertop sink unit.

About or Products and Service!

Our resurfacing products are 2 part surfacing products based on aerospace coating technology and applications. We painstakingly clean and prepare your existing surfaces then treat them with an aerospace bonding agent that etches itself into the existing surface creating a greater bonding surface and insures greater durability.

Once the bonding agent is verified as complete, (via ultraviolet light), then the 2 parts coating is applied. Our surfacing has been tested against numerous known products and chemicals known to cause damages to most surfaces. Our surfacing products have some of the highest laboratory tested ratings against many of the acids and cleaning products that are known to come in contact with the surfaces we apply our coatings to.

You can be assured that the products we use are the very best in the industry. We never cut corners and stand behind our products and services. When we finish your resurfacing project you will have a finished surface or surfaces that you can and will be proud of. Not to mention your friends and visitors will swear you spent a fortune while you laugh your way to the bank with your savings!

Feb 102016
 

Formica counter top with a burn mark. Burn mark removed and the surface repaired then color matched.

Formica Counter Burn Before

Formica Counter Burn Before

Formica Counter Burn After

Formica Counter Burn After

Most of us have encountered this disaster in our kitchens before. Burns on our countertops can destroy the entire look and feel of our kitchens. Our 2 part surface coating can solve these problems quick and inexpensively. We can color match any of your laminate tops even if they have flecks or veins in the color patern we can match the colors and pattern, making your countertops look great again.

CALL (918) 246-6493 for “YOUR FREE ESTIMATE TODAY”

Abount Our Products and Service!

Our resurfacing products are 2 part surfacing products based on aerospace coating technology and applications. We painstakingly clean and prepare your existing surfaces then treat them with an aerospace bonding agent that etches itself into the existing surface creating a greater bonding surface and insures greater durability.

Once the bonding agent is verified as complete, (via ultraviolet light), then the 2 parts coating is applied. Our surfacing has been tested against numerous known products and chemicals known to cause damages to most surfaces. Our surfacing products have some of the highest laboratory tested ratings against many of the acids and cleaning products that are known to come in contact with the surfaces we apply our coatings to.

You can be assured that the products we use are the very best in the industry. We never cut corners and stand behind our products and services. When we finish your resurfacing project you will have a finished surface or surfaces that you can and will be proud of. Not to mention your friends and visitors will swear you spent a fortune while you laugh your way to the bank with your savings!